What does a Rolex service include?

Close examination is an important step for correct and efficient Rolex maintenance. Expert watchmakers will proceed with a careful examination of the timepiece for any visible and invisible damages. Case, bracelet, and crystal conditions are rated. Further diagnostics on the movement of worn and damaged parts. This will ensure that nothing has escaped the watchful eyes of experts. An early identification of possible problems is determined for a complete service plan. Inspection is an important step for setting the right tone toward this service.

Photo Source: www.rolex.com

Photo Source: www.rolex.com

After inspection, the watch is disassembled. The complete movement is taken into its components. Gears, springs, and screws are removed and categorized so they can be reassembled. The parts are cleaned and checked by watchmasters. The movement’s disassembling is the main way of ensuring every timepiece works as new.

Once the movement is deconstructed, each component undergoes a step in ultrasonic cleaning. The process cleans dirt and old lubricants. High-frequency sound waves within a specific cleaning solution clean even the tiniest nooks in the components. The result is a clean set of parts free from dirt that could affect the performance of the watch. The cleaning in an ultrasonic will allow the restoration of brilliance to the movement and the preparation of components for lubrication and reassembly.

Photo Source: www.rolex.com

During the servicing, worn-out or broken parts are replaced with authentic Rolex Components. It’s a vital process because even a little malfunction will worsen entirely in maintaining the precision of the watch. According to strict standards ensured by Rolex, only authentic parts should be used in the replacement process. The watchmaker renews it to its previous use while replacing the worn parts to extend the lifespan by retaining its value and efficiency over the years.

The components of the movement are lubricated with the highest quality oils. Lubrication is done after cleaning and replacement of worn-out parts. Proper lubrication reduces friction among moving parts and smooths operation. Rolex watchmakers apply special lubricants created to resist extreme conditions. Lubricants ensure years of precision in watches. The lubrication process requires attention to detail. Even a slightly incorrect application may have the chance to affect the accuracy of the watch. Proper lubrication at this stage ensures so much about the long performance and reliability of your Rolex.

Photo Source: www.rolex.com

Photo Source: www.rolex.com

After cleaning, inspection, and lubrication of all parts, the movement is then assembled again. Every part has to fit together with perfection and function in harmony. After assembly, watchmakers start to careful timing adjustments. The watch finally achieves the high precision requirements set by Rolex. Equipped with high-technology equipment, the watch is submitted to a series of tests in various positions to confirm that.

The exterior of the Rolex watch is equally famous as the movement inside. The return of its brilliance is one of the major activities involved in the service. The case and bracelet are thoroughly cleaned and polished to remove scratches, scuffs, and any form of wear. Polishing is needed Not only aesthetically but also it’s important for keeping the value of the timepiece.

Photo Source: www.rolex.com

Photo Source: www.rolex.com

Water resistance testing is one of the most important servicing procedures. Once the assembly process is done, there will be several tests conducted. Like tests under pressure in specially designed equipment at that depth to confirm resistance. The procedure makes sure that a Rolex remains a sturdy and reliable companion under extreme conditions.

The last step of the service is to undergo one more checkup before getting back to you. the result is confirmed for functionality and aesthetic look by each independent watchmaker. The case and bracelet should be carefully examined for defects. All are followed by a series of performance tests, its power reserve check, assuring that winding is made precisely. Only then, when Rolex has passed all the extended checks, it is now ready to be returned.

It is recommended to keep a Rolex watch in mint condition. The watch should be serviced every 5-10 years depending on the wear and tear. This would retain the inner movement of the watch, its aesthetic appeal, and durability. Watches exposed to harsh conditions or showing problems, such as reduced accuracy or water resistance, might need servicing more frequently. Keeping track of your watch’s service history and its condition will help you to know when is the best time to service it for perfect performance.

Photo Source: www.rolex.com

Photo Source: www.rolex.com

It depends on the difficulty level of repairs and also differs from model to mode. In general, it would take around 4-6 weeks to have standard service. During that period, it goes through careful examination, disassembling, cleaning, replacing all worn parts, lubrication, and assembling again. If some other repair or personalizing is needed in between, it will take much longer. While this service may take some time, it means that every single detail in the timepiece is addressed to restore its original performance and aesthetic standards.